XPS 8910 Service Manual

Procedure

1. Disconnect the data and power cables from the hard drive.
2. Remove the screws that secure the hard-drive cage to chassis.

   

   1. #6-32 X 1/4'' screws (2)
   2. hard drive
   3. hard-drive cage
   4. power cable
   5. data cable

3. Lift the hard drive cage off the chassis.

   

   1. hard drive
   2. hard-drive cage

4. Remove the screws that secure the hard drive to the hard-drive cage.
5. Lift the hard drive out of the hard drive cage.
   NOTE: Note the orientation of the hard drive so that you can replace it correctly.

   

   1. #6-32 X 1/4'' screws (4)
   2. hard drive
   3. hard-drive cage