XPS 8910 Service Manual

Procedure

1. Locate the wireless-card slot on the system board.
   For more information, see “System-board components”.
2. Remove the screw that secures the wireless-card bracket to the wireless card and the system board.
3. Remove the wireless-card bracket and disconnect the antenna cables from the wireless card.
4. Slide and lift the wireless card off the system board.

   

   1. M2x2.5 screw
   2. wireless-card bracket
   3. antenna cables (2)
   4. system board
   5. wireless-card slot
   6. wireless card