Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Shared PowerEdge RAID Controller 8 Cards For Dell PowerEdge VRTX Systems User’s Guide

PDF

Installing the Shared PERC 8 External card

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
  1. Lift the expansion card latch out of the slot.
  2. Hold the card by its edges, and align the card edge connector with the card connector on the system board.
  3. Align the expansion card bracket with the metal standoff on the chassis.
  4. Insert the card edge connector into the card connector until the card is fully seated.
  5. Close the expansion card latch.
    • CAUTION: Applying pressure on the heat sink or battery while seating the Shared PERC 8 External card may cause damage to the card. Use only the touch points to seat the card.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\