Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Revive Disk Group

Description

This command forces the specified disk group and associated failed physical disks to the Optimal state. All physical disks assigned to the disk group must be installed before you attempt to run this command.

CAUTION: Correct use of this command depends on the data configuration on all of the physical disks in the disk group. Never attempt to revive a physical disk unless supervised by a Customer or Technical Support representative.

Syntax

revive diskGroup 
                                 [diskGroupNumber]

Parameter

Parameter	Description
diskGroup	Number of the disk group to be set to the optimal state. You must put brackets ([ ]) around the disk group number.