Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Test SNMP Trap Destination

Description

This command tests the connection and identification of the trap receiver for a specific Simple Network Management Protocol (SNMP) community. This command tests the trap destination by sending a trap message to the trap receiver.

Syntax

start snmpTrapDestination trapReceiverIP=ipAddress 
                                 communityName="communityName"

Parameters

Parameter	Description
`trapReceiverIP`	The IP address of the SNMP manager to which you want to send trap messages.
`communityName`	The name of the SNMP community for which you want to send trap messages.