Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Precision 7530 Service Manual

Removing the display panel

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. SD card
    2. base cover
    3. battery
    4. keyboard
    5. hard drive
    6. WWAN card
    7. WLAN card
    8. palmrest
    9. display assembly
    10. display bezel
  3. To remove screws from the display panel :
    1. Remove the 4 (M2.0X3.0) screws that secure the display panel to the display assembly [1].
    2. Lift the display panel and turn the display panel over to access the eDP cable [2].
    Removal of display panel screws
  4. To remove display panel:
    1. Peel the adhesive tape to access the eDP cable [1].
    2. Peel the adhesive tapes that secures the eDP cable [2, 3].
    3. Lift the metal tab and disconnect the eDP cable from the connector on the display panel [4, 5].
    Removal of display panel screws
  5. Remove the display panel.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\