Remove the 9 (M2.5x7.5) screws that secure the base cover to the system.
Pry the base cover from the edge using a plastic scribe [1] and lift the base cover from the system [2].
NOTE After removing the base cover screws, on-site technicians must
take care to remove the base cover carefully. There are prying
recess points next to the left and right hinges which will ease
the disassembly procedure. With the help of a plastic scribe, pry open
from the top left side of the base cover, continue working
your way around the left and right side of the base cover, then remove the
base cover from the system.
Lift the base cover away from the system.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\