Dell Chassis Management Controller Version 2.20 for PowerEdge FX2 and FX2s RACADM CLI Guide

RACADM Command Options

Table 1. Command options and their deception. The following table lists the options for the RACADM command.
Option	Description
-r <racIpAddr>	Specifies the controller’s remote IP address.
-u <usrName>	Specifies the user name that is used to authenticate the command transaction. If the -u option is used, the -p option must be used, and the -i option is not allowed. NOTE: If you are using CIFS that is registered with a domain, and are accessing the CIFS using the IP with the CIFS local user credentials, it is mandatory to enter the hostname or host IP with the -u option. The format is - < hostname/username> or < host IP/username>
-p <password>	Specifies the password used to authenticate the command transaction. If the -p option is used, the -i option is not allowed.
-S	Specifies that RACADM should check for invalid certificate errors. RACADM stops the execution of the command with an error message if it detects an invalid certificate.
-i <indexnumber>	Specifies the index number for the indexed group, if applicable.
-g <groupname>	Specifies the group name, if applicable.
-o objectname	Specifies the object name, if applicable.

Table 2. RACADM interfaces. The following table provides the supported RACADM interfaces.
Type	Local RACADM	SSH/Telnet RACADM	Remote RACADM
CMC	No	Yes	Yes