Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell PowerEdge FD332 Owner's Manual

PDF

Installing a hard drive/SSD into the drive rails

Prerequisites

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  • CAUTION: Do not keep the drive drawer open for more than three minutes.
  • NOTE: This is a field replaceable unit (FRU). Removal and installation procedures must be performed only by Dell certified service technicians.
  • NOTE: You must remove a hard drive/SSD from the drive rails if you are replacing the hard drive/SSD with a new drive.
  1. Ensure that you read the Safety instructions.
  2. Keep the #1 Phillips screwdriver ready.
  3. Remove the hard drive/SSD from the drive rails.

Steps

  1. Lay the hard drive/SSD on a flat surface with the connector side of the drive facing down.
  2. Align the screw holes on the drive rails with the screw holes on the hard drive/SSD. When aligned correctly, the drive rails are flush with the surface of the hard drive/SSD.
  3. Install the screws to secure the drive to the drive rails.

Next steps

  1. Open the drive drawer.
  2. Install the drive assembly in the drive drawer.
  3. Close the drive drawer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\