- Notes, cautions, and warnings
- Set up your computer
- Chassis
- System specifications
- System setup
- System setup
- General screen options
- System Configuration screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot screen options
- Intel Software Guard Extensions screen options
- Performance screen options
- Power Management screen options
- POST Behavior screen options
- Virtualization support screen options
- Wireless screen options
- Maintenance screen options
- System Log screen options
- Advanced configuration options
- SupportAssist System Resolution
- Software
- Getting help
Dell Vostro 3671 Setup and Specifications
Security screen options
- Option
- Description
- Admin Password
- Allows you to set, change, or delete the administrator
(admin) password.NOTE:You must set the admin password before you set the system or hard drive password. Deleting the admin password automatically deletes the system password and the hard drive password.NOTE: Successful password changes take effect immediately.
Default setting: Not set
- System Password
- Allows you to set, change, or delete the system password.NOTE: Successful password changes take effect immediately.
Default setting: Not set
- Internal HDD-0 Password
- Allows you to set, change, or delete the password
on the system's internal hard-disk drive.NOTE: Successful password changes take effect immediately.
Default Setting: Not set
- Internal HDD-3 Password
- Allows you to set, change, or delete the password
on the system's internal hard-disk drive.NOTE: Successful password changes take effect immediately.
Default Setting: Not set
- Password Change
- Allows you to enable the disable permission to the
System and Hard Drive passwords when the admin password is set.
Default setting: Allow Non-Admin Password Changes is selected.
- UEFI Capsule Firmware Update
- This option controls whether the system allows the BIOS updates through UEFI capsule update packages. This option is enabled by default.
- TPM 2.0 Security
- Allows you to enable the Trusted Platform Module (TPM)
during POST. The options are:
- TPM On (enabled by default)
- Clear
- PPI Bypass for Enabled Commands
- PPI Bypass for Disabled Commands
- PPI Bypass for Clear Command
- Attestation Enable (enabled by default)
- Key Storage Enable (enabled by default)
- SHA-256 (enabled by default)
- Disabled
- Enabled (enabled by default)
NOTE:To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software). - Computrace
- Allows you to activate or disable the optional Computrace
software The options are:
- Deactivate
- Disable
- Activate
NOTE:The Activate and Disable options will permanently activate or disable the feature and no further changes are allowedDefault setting: Deactivate
- Master Password Lockout
- The option Enable Master Password Lockout is not selected by default.
- SIMM Security Mitigation
- Allows you to enable or disable the additional UEFI
SIMM Security Mitigation protections.
Default Setting: SIMM Security Mitigation is not selected.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\