Managing Windows 10 IoT Enterprise LTSC 2021 Dell Computers using Microsoft Endpoint Configuration Manager Administrator’s Guide

Preparing the operating system image for capturing

1. Click Start > Log off, and hold the Shift key until the login window is displayed.
2. Log in as an administrator.
   NOTE:For Windows 10 IoT Enterprise image, the default user name is Admin, and the default password is DellCCCvdi.

   NOTE:For Windows Embedded Standard 7P and Windows Embedded Standard 7 image, the default user name is Administrator, and the default password is DellCCCvdi.
3. Double-click the green icon on the desktop to disable the write filter.
   The system restarts after the write filter is disabled.
4. Customize the drivers, application, wallpapers and so on.
5. Navigate to the C:\windows\setup folder, and run the Build_Master.cmd file.
   NOTE:For legacy scripts, run the WIE10_ConfigMgr_Capture.ps1 file as an administrator and for Powershell ported scripts, run Build_Master.cmd.
6. Select Configmgr Sysprep and press Enter.
7. To run the complete script, restart the thin client.
8. To open the Services window, press Windows+R, and type services.msc in the Open field.
9. Press Enter.
10. Ensure that the SMS Agent Host service is running. If the service is not active, right-click the service, and click Start.
    The image in the thin client is ready for capturing.

    NOTE: If you restart the thin client during capturing, all the Configuration Manager related customizations are reverted.