Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Edge Gateway 3001 Installation and Operation Manual

PDF

Mounting the Edge Gateway using the standard-mount bracket

Mounting dimensions

Image: Standard mounting dimensions

NOTE: The mounting brackets are shipped with only those screws that are required for securing the mounting brackets to the Edge Gateway.
  1. Secure the standard-mount bracket to the back of the Edge Gateway using the four M4x4.5 screws.
    NOTE: Torque the screws at 8±0.5 kilograms-centimeter (17.64±1.1 pounds-inch).
    Image: Securing the standard-mount bracket to the back of the Edge Gateway
  2. Place the Edge Gateway against the wall, and align the holes in the standard-mount bracket with the holes on the wall. Screw holes on the bracket have a diameter of 3 mm (0.12 in).
    Image: Place the Edge Gateway against the wall, and align the holes in the standard-mount bracket with the holes on the wall
  3. Place the standard-mount bracket on the wall, and using the holes above the screw holes on the bracket, mark the positions to drill the four holes.
    Image: Place the standard-mount bracket on the wall, and using the holes above the screw holes on the bracket, mark the positions to drill the four holes.
  4. Drill four holes in the wall as marked.
  5. Insert and tighten four screws (not supplied) to the wall.
    NOTE: Purchase screws that fit the diameter of the screw holes.
    Image: Insert and tighten four screws (not supplied) to the wall
  6. Align the screw holes on the standard-mount bracket with the screws and place the Edge Gateway onto the wall.
    Image: Align the screw holes on the standard-mount bracket with the screws and place the Edge Gateway onto the wall
  7. Tighten the screws to secure the assembly to the wall.
    Image: Tighten the screws to secure the Edge Gateway to the wall.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\