Dell Edge Gateway 3001 Installation and Operation Manual

Connect a network cable from Ethernet port one on the Edge Gateway to a DHCP-enabled network or router that provides IP addresses.
In your network's DHCP server, use the command dhcp-lease-list to obtain the IP address associated with the Edge Gateway's MAC address.
Setup as SSH session using an SSH terminal emulator (for example, native command-line ssh client on Linux or PuTTY on Windows).
NOTE: The SSH service is enabled on Ubuntu Core 16 by default.
Enter the command ssh admin@<IP address>, followed by the default user name and password. The default user name and password are both admin.
For example;
```
lo@lo-Latitude-E7470:~$ ssh admin@10.101.46.209
admin@10.101.46.209's password:
```

Boot up and log in – Remote system configuration