Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Configuring the Ports Settings

To configure the Ports settings:
  1. From the desktop menu, click System Setup, and then click Printer. The Printer Setup dialog box is displayed.
  2. Click the Ports tab, and use the following guidelines:
    1. Select Port— Select the port you want from the list. LPT1 or LPT2 selects the connection to a direct-connected USB printer.
    2. Printer Name — (Required) Enter name you want displayed in your list of printers. most USB direct-connected printers report/fill in their printer name automatically.
      • NOTE: If Enable LPD service for the printer is selected, the printer name becomes the queue name for other clients using LPR to print to this printer.
    3. Printer Identification — Enter the type or model of the printer in the exact text of the Windows printer driver name—including capitalizations and spaces, most USB direct-connected printers report/fill in their printer identifications automatically.

      This entry must be either the device driver name for the printer under the Microsoft Windows system, or a key to map to the device driver. If not specified, the name will be defaulted to the printer-supplied identification for standard direct-connected USB printers or Generic / Text Only for non-USB connected printers upon connection to Windows hosts. The driver name mapping takes place either through a printer-mapping file read by the system as part of the global profile (wnos.ini) or by MetaFrame servers through the MetaFrame printer configuration file (\winnt\system32\wtsprnt.inf).

    4. Printer Class— This is optional. Select the printer class from the list PCL5, PS, or TXT or PCL4.
    5. Enable the printer device — Select this option to enable the directly-connected printer. It enables the device to display on the remote host.
    6. Enable LPD service for the printer — Select this to make the thin client an LPD (Line Printer Daemon) network print server for LPR printing requests from the network.
      • NOTE:

        If the thin client is to be used as an LPD printer server, DHCP must not be used and a static IP address must be assigned to the client, see Configuring the Network Settings .

  3. Click OK to save the settings.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"