Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

Setting Up Windows 2003/2008 Servers

To Configure Setting the Windows 2003/2008 Servers

Navigate to Control Panel > Administrative Tools > Services and ensure the Microsoft TCP/IP Printing service is installed. If it is not, install it using the Microsoft installation instructions.
Add the thin client as the LPD printer by completing the following:
1. Navigate to Control Panel > Printers > Add Printers > Local Printer > Create a new port and select LPR PORT.
  - NOTE: If you do not see LPR Port, ensure that the Microsoft TCP/IP Printing service is installed correctly.
2. Type the thin client IP address or DNS name in the Name or address of host providing LPD box.
3. Type the printer name assigned in Using the Printer Setup Dialog Box for Configuring LPD Services in the Name of printer on that machine box.
4. Click OK, and then click NEXT.
After you have selected the printer, you can perform your normal printer setup for the application server. For example, select the manufacturer printer type and printer name.