- Notes, cautions, and warnings
- Introduction
- Getting Started:
Quickly Learning the Basics
- Connecting to a Remote Server
- Using Your Desktop
- Configuring Thin Client Settings and Connection Settings
- Connecting to a Printer
- Connecting to a Monitor
- Locking the Thin Client
- Signing Off and Shutting Down
- Additional Getting Started Details
- Classic Desktop Features
- Login Dialog Box Features
- Accessing System Information
- Global Connection Settings
- Configuring the Connectivity
- Configuring Thin Client Settings
- Citrix HDX RealTime Multimedia Engine (RTME)
- Advanced Details on Configuring ICA and RDP Connections
- ICA SuperCodec
- Features of RDP 8.1
- Introduction to Flash Redirection
- Introduction to TCX 7.0 Flash Redirection
- Performing Diagnostics
- Central Configuration: Automating Updates and Configurations
- CMOS Management
- Examples of Common Printing Configurations
- Security Changes
- Transport Layer Security (TLS)
- Important Notes
- Frequently Asked Questions
Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide
Accessing System Information
Use the
System Information dialog box to view
system information.
Classic Desktop — Click System Information from the desktop menu.
Zero Desktop — Click the System Information icon on the zero toolbar.
The
System Information dialog box includes:
General Tab — Displays general information such as System Version, Serial Number, Memory Size (Total and Free), CPU Speed, ROM Size, Monitor, Parallel ports, Terminal Name, Boot from, Memory speed, SSD size, Resolution and Serial ports.
Copyright Tab — Displays the software copyright and patent notices.
Acknowledgements button is added in the Copyright tab in System Information. This button is related to third party software and is available only in following clients:Wyse 3030 LT thin client with ThinOS
Wyse 5010 thin client with ThinOS (D10D)
Wyse 5040 AIO thin client (5212)
Wyse 5060 thin client with ThinOS
Wyse 7010 thin client with ThinOS (Z10D)
Wyse 3030 LT thin client with PCoIP
Wyse 5010 thin client with PCoIP (D10DP)
Wyse 5040 thin client with PCoIP (5213)
Wyse 5060 thin client with PCoIP
Event Log Tab — Displays the thin client start-up steps normally beginning from System Version to Checking Firmware or error Messages that are helpful for debugging problems. The details about the monitors connected to the thin client are also displayed.
Following is the screenshot displaying the Event Log tab for Monitors details:
Status Tab — Displays status information about TCP performance related parameters, UDP performance related parameters, CPU Busy, System Up Time, CCM status, Free Memory, Active sessions, and WDM status.
- IPv6 Tab — Displays IPv6 information such as Link-local Address, IPv6 Address and IPv6 Default Gateway.
- NOTE: This tab is displayed when IPv6 is enabled in the General tab of the Network Setup dialog box, see Configuring the Network Settings .
ENET Tab— Displays information about wired network connections.
WLAN Tab— Displays information about wireless network connections.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"