Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell FluidFS Version 6.0 FS8600 Appliance Deployment Guide

PDF

Configure DNS Settings

Specify IP addresses for DNS servers and DNS suffixes for the network.

About this task

Use this page of the Add FluidFS Cluster wizard to configure the DNS settings of the FluidFS cluster.
Figure 1. Add FluidFS Cluster Wizard — Configure DNS Settings PageConfigure DNS Settings page of the Add FluidFS Cluster wizard

Steps

  1. (Optional) To skip DNS configuration, select the Skip DNS Configuration checkbox and click Next. The Configure Time Settings page opens. See Configure Time Settings .
  2. In the DNS Servers IP Addresses area, specify DNS servers that the FluidFS cluster should use for name resolution.
    • To define a DNS server, type the server IP address in the field, then click Add.
    • To remove a DNS server, select the server IP address, then click Remove.
    • To increase or decrease the order of preference for a DNS server, select the server IP address, then click Up or Down.
  3. In the DNS Suffixes area, specify DNS suffixes that the FluidFS cluster should use for name resolution.
    • To define a DNS suffix, type the suffix in the field, then click Add.
    • To remove a DNS suffix, select the suffix, then click Remove.
    • To increase or decrease the order of preference for a DNS suffix, select the suffix, then click Up or Down.
  4. Click Next. The Configure Time Settings page opens.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"