Dell FluidFS Version 6.0 FS8600 Appliance Deployment Guide

Unpack the hardware and mount it in a rack.

1. Unpack the hardware.
2. Locate the following components for each appliance:
   • FS8600 appliance
   • Bezel
   • Two power cables
   • Rail kit
   • SFP+ transceivers (if ordered for optical networks)
   • (Fibre Channel with 10GbE appliances only) Two 1-meter twinax cables (for single-appliance internal network connectivity between controllers)
   • Two port label tags (one attached to each controller)
   • Cable labels
3. Mount each FS8600 appliance in the rack. See the document included with the rail kit for instructions.
4. Connect both controllers in each FS8600 appliance to a power source.