Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Preventing a Source from Registering with the RP

To prevent the PIM source DR from sending register packets to RP for the specified multicast source and group, use the following command. If the source DR never sends register packets to the RP, no hosts can ever discover the source and create a shortest path tree (SPT) to it.

Prevent a source from transmitting to a particular group. CONFIGURATION mode ip pim register-filter
In the following example, Source 1 and Source 2 are both transmitting packets for groups 239.0.0.1 and 239.0.0.2. R3 has a PIM register filter that only permits packets destined for group 239.0.0.2. An entry is created for group 239.0.0.1 in the routing table, but no outgoing interfaces are listed. R2 has no filter, so it is allowed to forward both groups. As a result, Receiver 1 receives only one transmission, while Receiver 2 receives duplicate transmissions.
Figure 1. Preventing a Source from Transmitting to a Group Illustration of preventing a source from transmitting to a group.
Table 1. Preventing a Source from Transmitting to a Group — Description
LocationDescription
1/21
  • Interface GigabitEthernet 1/21
  • ip pim sparse-mode
  • ip address 10.11.12.1/24
  • no shutdown
1/31
  • Interface GigabitEthernet 1/31
  • ip pim sparse-mode
  • ip address 10.11.13.1/24
  • no shutdown
2/1
  • Interface GigabitEthernet 2/1
  • ip pim sparse-mode
  • ip address 10.11.1.1/24
  • no shutdown
2/11
  • Interface GigabitEthernet 2/11
  • ip pim sparse-mode
  • ip address 10.11.12.2/24
  • no shutdown
2/31
  • Interface GigabitEthernet 2/31
  • ip pim sparse-mode
  • ip address 10.11.23.1/24
  • no shutdown
3/1
  • Interface GigabitEthernet 3/1
  • ip pim sparse-mode
  • ip address 10.11.5.1/24
  • no shutdown
3/11
  • Interface GigabitEthernet 3/11
  • ip pim sparse-mode
  • ip address 10.11.13.2/24
  • no shutdown
3/21
  • Interface GigabitEthernet 3/21
  • ip pim sparse-mode
  • ip address 10.11.23.2/24
  • no shutdown
Receiver 1
  • Interface VLAN 300
  • ip pim sparse-mode
  • ip address 10.11.3.1/24
  • untagged GigabitEthernet 1/1
  • no shutdown
Receiver 2
  • Interface VLAN 400
  • ip pim sparse-mode
  • ip address 10.11.4.1/24
  • untagged GigabitEthernet 1/2
  • no shutdown

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"