Dell PowerEdge T320 Systems Owner's Manual

Installing The Internal Hard-Drive Bay

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Align the internal hard-drive bay with the tabs on the chassis and slide the internal hard-drive bay into the chassis.
Secure the internal hard-drive bay to the chassis using the two captive screws.
Connect the data and power cable(s) to the hard drive(s).
Close the system.
Place the system upright on a flat, stable surface and if applicable, rotate the system feet outward.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.