Omitir para ir al contenido principal
Bienvenido
Sitios de Dell
Dell Technologies
Clientes Premier
Iniciar sesión en el programa para partners
Soporte
Sitios de Dell
Dell Technologies
Clientes Premier
Iniciar sesión en el programa para partners
Soporte
Cerrar
Bienvenido a Dell
Mi cuenta
Hacer pedidos rápida y fácilmente
Ver pedidos y realizar seguimiento al estado del envío
Cree y acceda a una lista de sus productos
Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión
Crear una cuenta
Clientes Premier
Iniciar sesión en el programa para partners
MX/ES
Carrito
Servicios
Soporte
Atrás
Soporte
Inicio de soporte
Biblioteca de soporte
Servicios de soporte y garantía
Controladores y descargas
Manuales y documentación
Diagnósticos y herramientas
Autorreparación y piezas
Solicitudes de servicio y estado del envío
Soporte para pedidos
Comuníquese con el soporte técnico
Comunidad
Tienda Dell
MX/ES
Atrás
home
Soporte
Soporte de productos
Manuales
Dell FluidFS Version 6.0 FS8600 Appliance Pre-Deployment Requirements
Ocultar tabla de contenidos
About This Guide
Revision History
Notes, Cautions, and Warnings
Deployment Prerequisites
Rack and Infrastructure
Materials
Network Credentials
SAN and Internal Network for Fibre Channel Appliances
SAN and Internal Networks for iSCSI Appliances
Client Network
IP Addresses and Network Infrastructure
Network Ports
SAN Configuration
Ocultar tabla de contenidos
Mostrar tabla de contenidos
Mostrar tabla de contenidos
Imprimir
PDF
Cargando, espere un momento…
Rack and Infrastructure
Make sure the rack space and related infrastructure are available for the FS8600 appliances.
■
Prerequisite
□
2U rack space for each FS8600 appliance in an industry-standard 48.3 cm (19 inch) rack
The rack must be four-post, square-hole or round-hole, and tool-less.
The rack must be rated for 540 kg (1200 pounds) static load or greater.
The rack depth must be at least 100 cm (40 inches) from the front to the back of the rack.
The distance between the inside of the front and back rack posts (the mounting surfaces) must be 61 cm (24 inches) to 90 cm (36 inches).
The rack door and the front of the hardware must have at least 4.1 cm (1.6 inches) between them to accommodate the front bezel.
The rack (with installed hardware) must meet the safety requirements of UL 60950-1 and IEC 60950-1.
□
Rack has two power sources for each FS8600 appliance, preferably from different circuits
The voltage range must be 90 to 264 VAC.
Each power source must have sufficient electrical overload protection.
In North America, connect the appliance to a source of power with overcurrent protection provided by a 20 A or less device (UL 489 circuit breakers).
In Europe, the overcurrent protection must be provided by a 20 A or less device (IEC circuit breakers).
□
Rack has connectivity to the SAN and client networks
Los datos no están disponibles para el tema
Califique este contenido
Todos los campos son obligatorios, a menos que se indique lo contrario.
Preciso
not accurate
somewhat accurate
mostly accurate
accurate
very accurate
Útil
not useful
somewhat useful
mostly useful
useful
very useful
Fácil de comprender
not easy
somewhat easy
mostly easy
easy
very-easy
¿Este artículo fue útil?
Sí
No
Envíenos sus comentarios
(Opcional)
0
/3000 characters
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Enviar comentarios
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Por favor, vuelva a intentarlo más tarde.
Muchas gracias por sus comentarios.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"