Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

PDF

cfgNetTuningNicRedunadant

Table 1. Details of cfgNetTuningNicRedunadant . The following table provides the details of cfgNetTuningNicRedunadant attribute:
Description	Specifies either Stacking or Redundant mode for CMC Management Port 2.
Legal Values	0 – Stacking 1 – Redundant
Default	0 – Stacking

NOTE: When Management Port 2 is set for Redundant but is cabled for Stacking, the downstream CMCs (further from the top-of-rack switch) will not have a network link.

NOTE: When Management Port 2 is set for Stacking but is cabled for Redundant (two connections to the TOR switch), routing loops could cause a network storm.