Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

PDF

getniccfg

Table 1. Details of getniccfg. The following table provides the details of getniccfg attribute:

Description

Displays the current NIC settings.

Synopsis 

racadm getniccfg

Input 

racadm getniccfg
racadm getniccfg –m <module>

where –m must be one of the following values:


                                             
                                             
                                                
                                             
                                             
    
                                                
  • 
                                                   
                                                      
                                                   
                                                   
    chassis  
    
                                                   : default
                                                   state if -m is not specified
                                                
    • 
                                                
                                                
  • 
                                                   
                                                      
                                                   
                                                   
     server-n 
    
                                                   : where
                                                   n = 1 to 4
                                                
    • 
                                                
                                                
  • 
                                                   
                                                      
                                                   
                                                   
    switch-n 
    
                                                   : where
                                                   n = 1 or 2
                                                
    • 
                                                
                                             

                                             
                                          		
                                          
                                       

                                       
                                       

                                          
                                             

                                                Example
                                             

                                             
                                          		
                                          
                                          
                                             

                                                racadm getniccfg
                                             

                                             
                                             
NIC Enabled = 1

                                             
                                             
IPv4 Enabled
                                                = 1
                                             

                                             
                                             
DHCP Enabled = 1

                                             
                                             
Static
                                                IP Address = 192.168.0.120
                                             

                                             
                                             
Static Subnet Mask
                                                = 255.255.255.0
                                             

                                             
                                             
Static Gateway = 192.168.0.1

                                             
                                             
Current IP Address = 192.168.0.12

                                             
                                             
Current Subnet Mask = 255.255.254.0

                                             
                                             
Current Gateway
                                                = 192.168.0.1
                                             

                                             
                                             
IPv6 Enabled = 0

                                             
                                             
Autoconfiguration Enabled = 1

                                             
                                             
Static IPv6 Address
                                                = ::/64
                                             

                                             
                                             
Static IPv6 Gateway = ::

                                             
                                             
Link Local Address = ::

                                             
                                             
Current IPv6 Address
                                                1 = ::
                                             

                                             
                                             
Current IPv6 Gateway = ::

                                             
                                             
Speed = Autonegotiate

                                             
                                             
Duplex = Autonegotiate

                                             
                                             
VLAN Enable = 0

                                             
                                             
VLAN ID = 1

                                             
                                             
VLAN priority = 0

                                             
                                             

                                                racadm
                                                   getniccfg -m server-1
                                                
                                             

                                             
                                             
LOM Model Name
                                                = BRCM 10GbE 2P 57810s bNDC
                                             

                                             
                                             
LOM Fabric Type =
                                                10 GbE KR
                                             

                                             
                                             
IPv4 Enabled = 1

                                             
                                             
DHCP Enabled = 1

                                             
                                             
IP Address = 192.168.0.18

                                             
                                             
Subnet Mask = 255.255.255.0

                                             
                                             
Gateway = 192.168.0.1

                                             
                                             
IPv6 Enabled = 0

                                             
                                             
Autoconfiguration Enabled = 0

                                             
                                             
Link
                                                local Address =
                                             

                                             
                                             
IPv6 Gateway = ::

                                             
                                             
VLAN Enable = 0

                                             
                                             
VLAN ID = 1

                                             
                                             
VLAN priority = 0

                                             
                                             

                                                racadm getniccfg -m
                                                   switch-1
                                                
                                             

                                             
                                             
DHCP Enabled = 1

                                             
                                             
IP Address = 192.168.0.12

                                             
                                             
Subnet Mask
                                                = 255.255.255.0
                                             

                                             
                                             
Gateway = 0.0.0.0

                                             
                                          		
                                          
                                       

                                       
                                    
                                    
                                 

                                 
                              

                              
                              

                                 Output
                              

                              
                              
The 
                                 getniccfg subcommand displays an appropriate error message if
                                 the operation is not successful. Otherwise, the output is displayed
                                 in the following format: 
                              

                              
                              
NIC Enabled               = 1
                                 IPv4 Enabled              = 1
                                 DHCP Enabled              = 1
                                 Static IP Address         = 192.168.0.120
                                 Static Subnet Mask        = 255.255.255.0
                                 Static Gateway            = 192.168.0.1
                                 Current IP Address        = 10.94.225.212
                                 Current Subnet Mask       = 255.255.255.128
                                 Current Gateway           = 10.94.225.129
                                 IPv6 Enabled              = 0
                                 Autoconfiguration Enabled = 1
                                 Static IPv6 Address       = ::/64
                                 Static IPv6 Gateway       = ::
                                 Link Local Address        = ::
                                 Current IPv6 Address 1    = ::
                                 Current IPv6 Gateway      = ::
                                 Speed                     = Autonegotiate
                                 Duplex                    = Autonegotiate
                                 VLAN Enable               = 0
                                 VLAN ID                   = 1
                                 VLAN priority             = 0
                                 $
                                 $ racadm getniccfg -m server-3
                                 LOM Model Name            = BRCM GbE 4P 5720 bNDC
                                 LOM Fabric Type           = Gigabit Ethernet
                                 IPv4 Enabled              = 1
                                 DHCP Enabled              = 0
                                 IP Address                = 0.0.0.0
                                 Subnet Mask               = 0.0.0.0
                                 Gateway                   = 0.0.0.0
                                 IPv6 Enabled              = 0
                                 Autoconfiguration Enabled = 1
                                 Link local Address        =
                                 IPv6 Gateway              = ::
                                 VLAN Enable               = 0
                                 VLAN ID                   = 1
                                 VLAN priority             = 0
                              

                              
                           

                           
                        

                        
                     

                     
                  

               

               

               
            

            
         

      

   



                    
                    

                    

                        

                            

                                

                                    

    

        

            
Califique este contenido

            

                

                    
                    
                    

                        

                            

                                 Preciso 
                                

                                    

                                        

                                        

                                        

                                        

                                        

                                    

                                

                            

                        

                        

                            

                                

                                    Útil
                                    

                                        

                                        

                                        

                                        

                                        

                                    

                                

                            

                        

                        

                            

                                

                                    Fácil de comprender
                                    

                                        

                                        

                                        

                                        

                                        

                                    

                                

                            

                        

                        

                            

                                ¿Este artículo fue útil?
                                

                                    
                                

                                

                                    
                                

                            

                        

                    

                    

                        
                        
                        
0/3000 characters

                    

                    

                        

                            

                        

                    

                    

                        

                            
                            
                        

                    

                

            

            

                

                    

                        
                    

                

            

        

    





                                    

                                        

                                            

                                                
                                            

                                        

                                    

                                

                            

                        

                

            

        

    

        
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).

        
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.

        
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"