Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge R330 Owner's Manual

Removing a cabled hard drive from a hard drive carrier

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Ensure that you follow the Safety instructions.
  2. Follow the procedure listed in Before working inside your system.
  3. Remove the cabled hard drive carrier.
  4. Keep the Phillips #2 screwdriver ready.

Steps

  1. Remove the screws from the side of the cabled hard drive carrier.
  2. Remove the hard drive from the hard drive carrier.
    Figure 1. Removing a cabled hard drive from a cabled hard drive carrier
    This figure shows removing a cabled hard drive from a cabled hard drive carrier.
    1. screw (4)
    2. cabled hard drive
    3. cabled hard drive carrier

Next steps

  1. Install the cabled hard drive in the hard drive carrier.
  2. Install the hard drive carrier into the slot.
  3. Follow the procedure listed in After working inside your system.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"