Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

XPS 13 Service Manual

Running the ePSA Diagnostics

Invoke diagnostics boot by either of the methods that are suggested below:

  1. Power on the computer.
  2. As the computer boots, press the F12 key when the Dell logo is displayed.
  3. In the boot menu screen, use Up/Down arrow key to select the Diagnostics option and then press Enter.
    • NOTE: The Enhanced Pre-boot System Assessment window displays, listing all devices detected in the computer. The diagnostics starts running the tests on all the detected devices.
  4. Press the arrow in the lower-right corner to go to the page listing. The detected items are listed and tested.
  5. To run a diagnostic test on a specific device, press Esc and click Yes to stop the diagnostic test.
  6. Select the device from the left pane and click Run Tests.
  7. If there are any issues, error codes are displayed. Note the error code and contact Dell.

    or

  8. Shut down the computer.
  9. Press and hold the Fn key, while pressing the power button, and then release both.
  10. Repeat steps 3–7 above.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\