- Notes, Cautions, and Warnings
- Overview
- Installation
and Quick Start
- Information Prerequisites
- Installing Active
System Manager
- Deployment Prerequisites
- Prerequisites for M1000e (with MXL), S5000, and Compellent
- Prerequisites for Rack Server, S5000, and Compellent
- Prerequisites for M1000e (with MXL), S5000, Brocade, and Compellent
- Prerequisites for Rack Server, S5000, Brocade and Compellent
- Prerequisites for M1000e (with MXL), Cisco Nexus, and Compellent
- Prerequisites for Rack Server, Cisco Nexus, and Compellent
- Prerequisites for M1000e (with MXL), Cisco Nexus, Brocade, and Dell Compellent
- Prerequisites for Rack Server, Cisco Nexus, Brocade, and Dell Compellent
- Prerequisites for M1000e (with MXL and FC FlexIOM), Brocade, and Dell Compellent
- System Center Virtual Machine Manager (SCVMM) Prerequisites
- Deploying ASM from VMware vSphere Client
- Deploying ASM using SCVMM
- Deploying ASM on Hyper-V host
- Rectifying mounting errors during Hyper–V deployment
- Configuring ASM Virtual Appliance
- Customizing Virtual Machine Templates for VMware and Hyper-V
- Configuring ASM Virtual Appliance for NetApp Storage Support
- Completing Initial Configuration
- Installing Windows ADK 8.1.1 for OS Prep for Windows
- Configuring DHCP or PXE on External Servers
Bienvenue
Bienvenue dans l’univers Dell
Mon compte
- Passer des commandes rapidement et facilement
- Afficher les commandes et suivre l’état de votre expédition
- Créez et accédez à une liste de vos produits
- Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Active System Manager Release 8.1.1 Installation Guide
Adding NetApp Ruby SDK to ASM Virtual Appliance
NetApp Manageability SDK files are available to download directly from NetApp. You need a NetApp NOW account to download the SDK.. These files are DfmErrno.rb, NaElement.rb, NaErrno.rb, and NaServer.rb
The NaServer.patch file is available on the ASM appliance at location /etc/puppetlabs/puppet/modules/netapp/files/NaServer.patch You will need the above files to proceed further. Contact your administrator for any additional patch files, or updates.
-
Log in to the ASM Appliance.
-
Download and copy the NetApp SDK Ruby lib files to the ASM Appliance /tmp/*.
-
Copy these Ruby libs files from /tmp to /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp
# sudo cp /tmp/*.rb /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp
-
Copy any patch file(s) to the ASM Appliance /tmp directory, currently there is NaServer.patch
# sudo cp /etc/puppetlabs/puppet/modules/netapp/files/NaServer.patch /tmp
-
Apply the patch(es) to update the NetApp SDK Ruby files.
# sudo patch /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp/NaServer.rb </tmp/NaServer.patch
- Update the permissions on the NetApp module. To update
the permissions, run the following command:
# sudo chmod 755 /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp/*
-
Change the owner of the files. To change the owner of the files, run the following command:
# sudo chown pe-puppet:pe-puppet /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp/*
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\