Active System Manager Release 8.1.1 Installation Guide

• DCB needs to be enabled.

• VLT needs to be disabled.

• Enable Fibre Channel capability and Full Fabric mode.

  feature fc 
                                                        fc switch-mode fabric-services
                                                        
                                                     

• Enable FC ports connecting to Compellent storage array and FC ports connecting to other S5000 switch via ISL links.

  interface range fi 0/0 - 7 
                                                        no shut
                                                        
                                                     

• Create DCB Map.

  dcb-map SAN_DCB_MAP
                                                        priority-group 0 bandwidth 60 pfc off 
                                                        priority-group 1 bandwidth 40 pfc on 
                                                        priority-pgid 0 0 0 1 0 0 0 0 
                                                        exit
                                                        
                                                     

• Create a FCoE VLAN.

  interface vlan <VLAN ID> [Create VLAN for FCoE]
                                                        exit
                                                     

• Create FCoE Map.

  fcoe-map default_full_fabric
                                                        fabric-id <FCoE VLAN ID> vlan <FCoE VLAN Id>
                                                        fc-map <FC MAP>
                                                        exit
                                                     

Fault domain need to be created as per Compellent best practices.