Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

Show Virtual Disk

Description

For the virtual disks in a storage array, this command returns the following information:

The number of virtual disks
The name
The status
The capacity
The RAID level
The disk group where the virtual disk is located
Details:
- The virtual disk ID
- The subsystem ID
- The physical disk type (SAS)
- Enclosure loss protection
- The preferred owner
- The current owner
- The segment size
- The modification priority
- The read cache status (enabled or disabled)
- The write cache status (enabled or disabled)
- The write cache without batteries status (enabled or disabled)
- The write cache with replication status (enabled or disabled)
- The flush write cache after time
- The cache read prefetch setting (TRUE or FALSE)
- The enable background media scan status (enabled or disabled)
- The media scan with redundancy check status (enabled or disabled)
The snapshot (legacy) repository virtual disks
The replication repository virtual disks
The snapshot (legacy) virtual disks
The snapshot (legacy) copies

Syntax

show (allVirtualDisks | virtualDisk [
                                 virtualDiskName] |
                                 virtualDisks [
                                 virtualDiskName1 ...
                                 virtualDiskNameN]) summary

Parameters

Parameter	Description
`allvirtualDisks`	The setting to return information about all of the virtual disks in the storage array.
`virtualDisk or virtualDisks`	The name of the specific virtual disk for which you are retrieving information. You can enter more than one virtual disk name. Enclose the virtual disk name in square brackets ([ ]). If the virtual disk name has special characters, you also must enclose the virtual disk name in double quotation marks (“ ”).
`summary`	The setting to return a concise list of information about the virtual disks.

Notes

For snapshot virtual disk copies, the show virtualDisk command returns information about the schedules for the snapshot virtual disk copies. The schedule information is in this form:

Schedule State: "Active" | "Disabled" | "Completed"
                                 Last Run Time: <mm/dd/yyyy> <hh:mm a.m. | p.m.>
                                 Next Run Time: <mm/dd/yyyy> <hh:mm a.m. | p.m.>
                                 Start Date: <mm/dd/yyyy> End Date: <mm/dd/yyyy> | "No End Date"
                                 End Date:
                                 Days of Week: <Sunday - Saturday>, <Sunday - Saturday>, ….
                                 Times for snapshot recreate: <hh:mm a.m. | p.m.>, <hh:mm a.m. | p.m.>

Bienvenue

Bienvenue dans l’univers Dell