Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Stop Snapshot (Legacy)

Description

This command stops a copy-on-write operation.

Syntax

stop snapshot (virtualDisk [
                                 virtualDiskName] | 
                                 virtualDisks [
                                 virtualDiskName1... virtualDiskNameN])
                              

Parameters

Parameter Description
virtualDisk or virtualDisks The name of the specific virtual disk for which you want to stop a copy-on-write operation. You can enter more than one virtual disk name.
Enclose the virtual disk names using one of these forms:
  • On a Windows command line: \"virtualDiskName\"
  • In a Windows script engine window: ["virtualDiskName"]
  • On a Linux command line: \"virtualDiskName\"
  • In a Linux script engine window: [\"virtualDiskName\"]

Notes

Names can be any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#). Names can have a maximum of 30 characters.

One technique for naming the snapshot (legacy) virtual disk and the snapshot (legacy) repository virtual disk is to add a hyphenated suffix to the original base virtual disk name. The suffix distinguishes between the snapshot (legacy) virtual disk and the snapshot (legacy) repository virtual disk. For example, if you have a base virtual disk with a name of Engineering Data, the snapshot (legacy) virtual disk can have a name of Engineering Data-S1, and the snapshot (legacy) repository virtual disk can have a name of EngineeringData- R1.

If you do not choose a name for either the snapshot (legacy) virtual disk or the snapshot (legacy) repository virtual disk, the MD storage management software creates a default name by using the base virtual disk name. An example of the snapshot (legacy) virtual disk name that the RAID controller modules might create is, if the base virtual disk name is aaa and does not have a snapshot (legacy) virtual disk, the default snapshot (legacy) virtual disk name is aaa-1. If the base virtual disk already has n-1 number of snapshot (legacy) virtual disks, the default name is aaa- n. An example of the snapshot (legacy) repository virtual disk name that the RAID controller module might create is, if the base virtual disk name is aaa and does not have a snapshot (legacy) repository virtual disk, the default snapshot (legacy) repository virtual disk name is aaa- R1 . If the base virtual disk already has n-1 number of snapshot (legacy) repository virtual disks, the default name is aaa-R n.


Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\