OpenManage Integration for Microsoft System Center Version 7.2.1 for System Center Configuration Manager and System Center Virtual Machine Manager Unified User’s Guide
If you are not using the default update source, and then create an update source. For more information, see
Creating update source.
About this task
You can create
an Operational Template by capturing the configuration of the reference Modular Systems.
After capturing the configuration, you can directly save the template,
or edit the attributes for update source and hardware configuration
as per your requirement. Now you can save the template, that can be
used to configure other Modular Systems of the same model.
NOTE: If you want to configure
Active Directory (AD) users on other MX7000 devices ensure that you
create an Operational Template from an MX7000 Modular System where all the AD users are configured.
NOTE: User account’s
passwords are not captured in Operational Template, from reference
Modular System for security reasons. Edit the Operational Template to add
a new user account and password, and then apply the Operational Template on the
managed Modular Systems. Else, you can apply the Operational Template without
any changes to user accounts, and the same passwords that are used
in the reference Modular System are applied on the managed Modular System.
Steps
In
OMIMSSC, do any of the following to open an
Operational Template:
In the
OMIMSSC dashboard, click
Create Operational Template.
In the navigation pane, click
Profiles
> Operational Template, and then click
Create.
The
Operational Template wizard is displayed.
Enter a name and description for the template.
In
Device Components, click a component to view the available attributes and their values.
The components are as follows:
Firmware update
Management
Module Embedded
NOTE: Ensure that the Web Server attribute is enabled.
If this component is not enabled, and then the MX7000 Modular Systems
cannot be accessed through OMIMSSC after deploying the Operational Template.
NOTE: For SNMP Configuration and Syslog Configuration, ensure that you select all four configurations available in each
attribute, to apply them on managed devices.
Use the horizontal scroll bar to locate a component. Select the component, expand a group, and then edit its attribute values. Use the vertical scroll bar to edit a groups and attributes of a component.
Select the check box against each component, because, the configurations of selected components are applied on the managed device, when the
Operational Template is applied. However, all the configurations from the reference device are captured and saved in the template.
To save the profile, click
Finish.
Non sono disponibili i dati per l'argomento
Fornisci una valutazione (1-5 stelle).
Fornisci una valutazione (1-5 stelle).
Fornisci una valutazione (1-5 stelle).
Indica se l'articolo è stato utile o meno.
I commenti non possono contenere i seguenti caratteri speciali: <>() \