Dell PowerEdge T630 Owner's Manual

Removing caster wheels

Follow the safety guidelines listed in the safety instructions section.
Keep the Phillips #2 screwdriver ready.
Place the system on a flat, stable surface with the wheels extending beyond the edge of the surface.

Remove the screw that secures the front wheel unit to the base of the chassis.
Offset the front wheel unit slightly to the back of the system to release the retention hooks, and pull out the front wheel unit.
Remove the screw that secures the back wheel unit to the base of the chassis.
Offset the back wheel unit slightly to the front of the system to release the retention hooks, and pull out the back wheel unit.
Figure 1. Removing caster wheels
1. slots on base of the tower (4)
2. wheel assembly unit (2)
3. screw (2)
4. screw for support unit (2)
5. support unit