메인 콘텐츠로 이동
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.

Dell Command | Monitor Version 9.1 SNMP Reference Guide

PDF

Dell Command | Monitor management instrumentation base

The Dell Command | Monitor MIB (10909.mib) provides instrumentation data that allows you to monitor the health of a client system with SNMP management applications. It provides:
  • Information about the status at key points in the system.
  • Rapid access to detailed fault and performance information gathered by industry-standard systems management agents.
  • Version information for BIOS, firmware, and operating system.

In addition, traps are sent to report a change in status of the health of critical components.

The Dell Command | Monitor MIB structures the MIB objects into groups of scalar objects or MIB tables that provide related information. The following describes each Dell Command | Monitor MIB group and lists the MIB group number assigned to the MIB group. The Dell Command | Monitor MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10909.1.< MIB group number> , where < MIB group number> is the number assigned to the MIB group.
  • NOTE: From Dell Command | Monitor version 9.0 onwards, the 10892 MIB is not supported. The 10909 MIB deprecates 10892 MIB and identifies only client systems.
  • NOTE: You cannot perform write and set operations on MIB group variables.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.