Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

--embsataraid

Option	`--embsataraid`
Valid Arguments	off, combined, ata, ahci, raid, qdma
Description	Configures an embedded SATA RAID controller. This option can be replicated. off — disables the embedded SATA RAID controller. combined — sets the SATA RAID controller to combined mode. ata — sets SATA RAID controller to ATA mode. ahci — sets ATA RAID controller to ahci mode. raid — sets SATA RAID controller to RAID mode. qdma — sets the SATA RAID controller to support ATAPI devices at transfer rates much higher than PIO. A device driver must be installed on your system to use the QDMA mode. Example: A:>syscfg --embsataraid=off embsataraid=off
Applicable Systems	All PowerEdge systems prior to PowerEdge 12G systems.