메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Dell Shared PowerEdge RAID Controller 8 Cards For Dell PowerEdge VRTX Systems User’s Guide

PDF

Postinstallation tasks for the Shared PERC 8 Internal card

  1. Turn on the PowerEdge VRTX system without hard drives and server modules inserted.
    • NOTE: It may take up to 25 minutes for the PowerEdge VRTX storage subsystem to completely power on.
  2. Log in to the CMC GUI.
  3. Click Overview → Power → Control, and view the Power State to ensure that it is ON.
  4. Click Chassis Overview → Storage → Controllers to view the firmware version of the replaced Shared PERC 8 Internal card. The firmware version must be same for both the cards.
    • NOTE: If the Shared PERC 8 Internal cards have different versions of their firmware, download and update the firmware to the latest version from Dell.com/drivers.
  5. If the system has two Shared PERC 8 Internal cards, ensure that the Fault Tolerance Status is Healthy/Normal. This is necessary to ensure that any new firmware has been initialized and is compatible before you reinsert the shared hard drives and modular servers.
  6. Turn off the PowerEdge VRTX system.
  7. Insert the shared storage hard drives that you had removed earlier. Insert the shared hard drives in the original slots.
  8. Turn on the PowerEdge VRTX system.
  9. Check the Virtual Disk Layout and the Virtual Disk Assignments in the CMC GUI. If the virtual disks are not imported, not present, or the virtual disk assignments are not present or are incorrect, contact Dell Technical Support.
  10. Turn off the PowerEdge VRTX system.
  11. Insert the server modules that you had removed earlier. Insert the server modules in the original slots.
  12. Turn on the PowerEdge VRTX system.
  13. Turn on the server modules.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.