Ga naar hoofdinhoud
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.

Dell PowerEdge T630 Owner's Manual

Removing the optional GPU card holder

Prerequisites

  1. Follow the safety guidelines listed in the safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section
  3. Remove the cooling shroud.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Steps

Press the release tab and pull the GPU card holder out of the chassis.
Figure 1. Removing the GPU card holder
This figure shows removing the GPU card holder.
  1. release tab
  2. GPU card holder

Next steps

  1. Install the cooling shroud.
  2. Follow the procedure listed in the After working inside your system section.


Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \