Ga naar hoofdinhoud
Uitloggen

Welkom bij Dell

Mijn account
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.
Inloggen Een account maken Inloggen bij Premier Aanmelden voor partnerprogramma
Contact

Uw Dell.com-winkelwagentjes

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Setting the General System Preference

To configure the general settings for system preference:
  1. From the desktop menu, click System Setup, and then click System Preferences. The System Preference dialog box is displayed.
  2. Click the General tab, and use the following guidelines:
    1. Screen Saver — Allows you to select the type of screen saver you want. The default is to Turn Off Screen.

      Other selections available include Flying Bubbles , Moving Image and Showing Pictures which are screen savers with the monitor remaining on.

    2. Timer — Select a time after which the screen saver is to be activated; either disable, 1 minute, 5 minutes, 10 minutes (default), 15 minutes, or 30 minutes.

      When the thin client is left idle for the specified idle time, the screen saver is initiated.

    3. Locale — Select a language to be activated for the user login-experience; either French, German, or default English.
      • NOTE: Locale changes the language for the user login-experience screens only displayed during boot-up and login and not the configuration or administrator screens.
      Only the following messages are applicable for French locales:

      • Username/Password/Domain

      • System Information

      • Shut down the system, restart the system, reset the system setting to factory default

      • OK, Cancel

      • Initiating devices

      • Looking up IP address from DHCP, Note: Pressing CTRL-ESC keys cancel out of network check

      • Retry DHCP for an IP address

      • Waiting for network link. Verify that network cable is plugged into back of unit

      • Check Cable, No Ethernet link

      • Leave administrator mode

      • Connecting

      • Sign off from account

      • Lock Terminal, Unlock Password

      • Terminal is locked, Invalid unlock password

    4. Terminal Name — Allows entry of a name for the thin client. The default is a 14-character string composed of the letters WT followed by the thin client Ethernet MAC address.

      Some DHCP servers use this value to identify the IP address lease in the DHCP Manager display.

  3. Click OK to save the settings.

Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \