Ga naar hoofdinhoud
Uitloggen

Welkom bij Dell

Mijn account
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.
Inloggen Een account maken Inloggen bij Premier Aanmelden voor partnerprogramma
Contact

Uw Dell.com-winkelwagentjes

Dell Wyse ThinOS Release 8.3.1 Administrator’s Guide

PDF

Using the Printer Setup Dialog Box for Windows Network Printers (SMB)

Configuring an SMB printer is this manner forces users to enter their credentials before each printing; this means they will be temporarily pulled out of their remote session to enter their credentials (this can be avoided by using an INI file as discussed in Using INI Parameters for Windows Network Printers (SMB) .

Enter the context of your task here (optional). This is where introductory content goes.
  1. From the desktop menu, click System Setup > Printer . The Printer setup dialog box is displayed.
  2. Click the SMBS tab, and use the following guidelines when printing to a Windows network printer:
    • NOTE: The printer name shared by Windows must not contain any spaces or ThinOS will not be able to use it.
    1. Select SMB — Select the SMB you want from the list.
    2. \\Host\Printer — Click the browse folder icon next to the box to browse your Microsoft Networks and make the printer selection you want from the network printers available the DNS name or IP address of the Windows print server on the network. After entering required domain credentials, the Printer Setup dialog box will display
    3. Printer Name — Enter name you want displayed in your list of printers.
    4. Printer Identification — Enter the type or model of the printer in the exact text of the Windows printer driver name—including capitalizations and spaces. In example case, enter HP LaserJet 4100 Series PCL.
    5. Printer Class —You can leave this as default.
    6. Enable the printer device — Must be selected to enable the printer.

      It enables the device so it displays on the remote host.

      Click Test Print and you will be prompted to enter your Windows credentials, these credentials will be used to access the printer share. This is also the same dialog box that will display for a user when they attempt to print to this printer.

Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \