- Notes, cautions, and warnings
- Working on your computer
- Disassembly and reassembly
- Technology and components
- BIOS Overview
- System setup options
- Navigation keys
- System Setup overview
- Accessing System Setup
- General screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Wireless screen options
- Memory specifications
- System logs screen options
- SupportAssist system resolution
- Updating the BIOS in Windows
- System and setup password
- Technical specifications
- System specifications
- Processor specifications
- Memory specifications
- Storage specifications
- Audio specifications
- Video specifications
- Camera specifications
- Communication specifications
- Port and connector specifications
- Keyboard specifications
- Touchpad specifications
- Battery specifications
- AC adapter specifications
- Physical specifications
- Environmental specifications
- Troubleshooting
- Contacting Dell
Latitude 3180 Owner's Manual
Power management screen options
- Option
- Description
- AC Behavior
- Allows you to enable or disable the computer from
turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.
- Auto On Time
- Allows you to set the time at which the computer must
turn on automatically. The options are:
- Disabled
- Every Day
- Weekdays
- Select Days
Default setting: Disabled
- USB Wake Support
- Allows you to enable USB devices to wake the system
from Standby.NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the system setup removes power from all the USB ports to conserve battery power.
- Enable USB Wake Support
- Wake on Dell USB-C dock
Default setting: The option is disabled.
- Wake on WLAN
- Allows you to enable or disable the feature that powers
on the computer from the Off state when triggered by a LAN signal.
- Disabled
- WLAN
Default setting: Disabled
- Block Sleep
- This option lets you block entering to sleep (S3 state)
in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
- Peak Shift
- This option enables you to minimize the AC power consumption
during the peak power times of day. After you enable this option,
your system runs only in battery even if the AC is attached.
- Enable peak shift
- Set battery threshold (15% to 100%) - 15 % (enabled by default)
- Advanced Battery Charge Configuration
- This option enables you to maximize the battery health.
By enabling this option, your system uses the standard charging algorithm
and other techniques, during the nonwork hours to improve the battery
health.
Disabled
Default setting: Disabled
- Primary Battery Charge Configuration
- Allows you to select the charging mode for the battery.
The options are:
- Adaptive—enabled by default
- Standard—Fully charges your battery at a standard rate.
- ExpressCharge—The battery charges over a shorter time using Dell’s fast charging technology This option is enabled by default.
- Primarily AC use
- Custom
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option. - Sleep mode
OS Automatic selection
Force S3—enabled by default
Oppgi vurderinger (1–5 stjerner).
Oppgi vurderinger (1–5 stjerner).
Oppgi vurderinger (1–5 stjerner).
Velg om artikkelen var nyttig eller ikke.
Kommentarer kan ikke inneholde disse spesialtegnene: <>()\