Dell Lifecycle Controller GUI v2.30.30.30 User's Guide

Breaking mirrored drives

To split the mirrored array of RAID-1 virtual drives:

Start Lifecycle Controller.
In the left pane, click Hardware Configuration.
In the right pane, click Configuration Wizards.
Under Storage Configuration wizards, click Break Mirror. The Break Mirror page is displayed with the mirrored virtual drives.
Select the related controller and click Finish.
- NOTE: The Break Mirror feature does not support software RAID controllers.
- NOTE: For more information about the break mirror feature, see the Performing a Break-Mirror Operation Using Lifecycle Controller white paper at delltechcenter.com/lc.
The system automatically turns off even if one mirrored array is successfully delinked.