Prerequisites to capture and deploy an operating system
When capturing an operating system image by using capture media task sequence, ensure that the
FODPacks folder is not present in the C drive. If there is any
FODPacks folder, delete the folder.
When you deploy an operating system image to the client by using a task sequence, the size of the wim file that is captured using the capture media and the size of the used space of drive C in the reference device put together must be less than the capacity of drive C.
For example, if the size of the wim file that is captured from reference device is 8 GB, the size of the used space in the drive C is 17 GB. You can then deploy the wim file only if the capacity of operating system drive is greater than 25 GB.
You must create cmd scripts execute-DEW-script.cmd and Task-sequence-dew-script.ps1 before you create a task sequence to deploy Windows reference image.
Create a text file with name
execute-DEW-script and copy the following content to the file:
Save the text file in the
SCCM Share DEW folder with name
Task-sequence-dew-script.ps1.
NOTE:For better performance during imaging, Dell Technologies recommends that the total size of the wim file and the used space is 1 GB less than the size of drive C.
Data er ikke tilgjengelig for emnet
Oppgi vurderinger (1–5 stjerner).
Oppgi vurderinger (1–5 stjerner).
Oppgi vurderinger (1–5 stjerner).
Velg om artikkelen var nyttig eller ikke.
Kommentarer kan ikke inneholde disse spesialtegnene: <>()\