XPS 13 Service Manual

Procedure

Align the notches on the wireless card with the tabs in the wireless-card slot.
- CAUTION: To avoid damage to the wireless card, never place cables under the wireless card.
Slide the wireless-card at an angle into the wireless-card slot.

Connect the antenna cables to the wireless card. The following table provides the antenna cable color scheme for the wireless card supported by your computer.

Table 1. Antenna-cable color scheme. The following table lists connectors on the wireless card and the color scheme of the antenna cable.
Connectors on the wireless card	Antenna-cable color
Main (white triangle)	White
Auxiliary (black triangle)	Black

Press the other end of the wireless card down.
Place the wireless-card bracket on the wireless card.
Replace the screw (M2x3) that secures the wireless-card bracket to the system board.
Figure 1. Replacing the wireless card
1. wireless card
2. notch
3. tab
4. antenna cables (2)
5. screw
6. wireless-card bracket
7. wireless-card slot