- About This Guide
- Notes, Cautions, and Warnings
- Introduction
- Deployment Prerequisites
- Install and Connect the FS8600 Hardware
- Configure the
FluidFS Cluster
- Configure FluidFS Cluster Network Settings
- Connect to the FluidFS Cluster CLI
- Configure Cluster IP Addresses and the Default Gateway
- Use Dell Storage
Manager to Configure the FluidFS Cluster
- Prerequisites
- Log In to Dell Storage Manager
- Add the FluidFS Cluster to Dell Storage Manager
- Select Appliances
- Configure the Client Network
- Configure the Default Gateway
- Configure DNS Settings
- Configure Time Settings
- Select Storage Centers
- Configure Fibre Channel SAN Connectivity
- Configure iSCSI SAN Connectivity
- Finalize FluidFS Cluster Configuration
- Remove a FluidFS Cluster From Dell Storage Manager
- Configure FluidFS Cluster Network Settings
- Perform Post-Setup Tasks
- Upgrade an Appliance to the Latest FluidFS 6.0 Version
- iSCSI Switch Configuration Examples
Damos-lhe as boas-vindas
Damos-lhe as boas-vindas à Dell
Minha conta
- Efetuar encomendas de forma rápida e fácil
- Ver todas as encomendas e controlar o seu estado de expedição
- Criar e aceder a uma lista dos seus produtos
- Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Dell FluidFS Version 6.0 FS8600 Appliance Deployment Guide
Example of Multi-Appliance FC 10GbE Cluster Configuration
The following example shows the best-practices configuration for multi-appliance Fibre Channel 10GbE clusters.
- Client network – Each FS8600 controller has multiple connections to each stacked Ethernet switch.
- Internal network – Each FS8600 controller has multiple connections to the stacked internal network Ethernet switches.
- Fibre Channel SAN – Each FS8600 controller has a connection to each FC fabric (Storage Center fault domain).
Figure 1. Multi-Appliance
Fibre Channel 10GbE Cluster Configuration With an SCv2080 Storage
System
- Client network
- Internal network
- Fibre Channel SAN switch
- SCv2080 with 10Gb FC ports
- Client network connections
- Internal network connections
- Storage Center fault domain 1 connections
- Storage Center fault domain 2 connections
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Selecione se o artigo foi útil ou não.
Os comentários não podem conter estes caracteres especiais: <>()\