Treceți la conținutul principal
Deconectare

Bun venit la Dell

Contul meu
  • Plasaţi comenzi rapid şi simplu
  • Vizualizaţi comenzile şi urmăriţi starea transportului
  • Creaţi şi accesaţi o listă cu produsele dvs.
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Autentificare Creaţi un cont Autentificare la Premier Autentificare la programul pentru parteneri
Contactaţi-ne

Dell Chassis Management Controller Version 3.0 for Dell EMC PowerEdge VRTX User's Guide

PDF

Configuring Power Budget and Redundancy Using CMC Web Interface

NOTE To perform power management actions, you must have the Chassis Configuration Administrator privilege.
To configure power budget:
  1. In the left pane, click Chassis Overview > Power > Configuration.
  2. On the Budget/Redundancy Configuration page, select any or all of the following properties as appropriate. For information about the field descriptions, see the Online Help.
    • Enable Server-Based Power Management
    • System Input Power Cap
    • Redundancy Policy
    • Enable Dynamic Power Supply Engagement
    • Disable Chassis Power Button
    • Max Power Conservation Mode
    • Enable Remote Power Logging
    • Remote Power Logging Interval
  3. Click Apply to save the changes.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\