Dell PowerEdge Express Flash NVMe PCIe SSD Adapter User’s Guide

To view the complete set of NVMe PCIe SSD properties, select Full View from the Options taskbar. Physical device properties are described below:

Name

Displays the name of the NVMe PCIe SSD. The name includes the slot ID in which the NVMe PCIe SSD Adapter is installed.

State

Displays the current state of the NVMe PCIe SSD Adapter.

Bus Protocol

Displays the technology that the NVMe PCIe SSD Adapter is using.

Device Name

In Windows: \\.\PhysicalDriveX.

In Linux: /dev/nvmeXn1.

Media

Displays the media type of the physical SSD.

Remaining Rated Write Endurance

Displays the warranted wear out level of the NVMe PCIe SSD (in percentage).

Firmware Revision

Displays the currently running firmware version on the NVMe PCIe SSD.

Driver Version

Displays the currently running driver version of the NVMe PCIe SSD.

Model Number

Displays the Piece Part Identification (PPID) of the NVMe PCIe SSD.

Capacity

Displays the full capacity of the device.

Form Factor

Displays the form factor of the NVMe PCIe SSD installed in the system.

Vendor ID

Displays the hardware vendor of the device.

Product ID

Displays the product ID of the device.

Serial No.

Displays the serial number of the device.

PCIe Negotiated Link Speed

Displays the speed of data transfer that the device negotiated upon initial communication. This speed depends the speed of the device.

PCIe Maximum Link Speed

Displays the highest possible speed at which the device can transfer data.

PCIe Maximum Link Width

Displays the link width of the device.

Form Factor

Displays the form factor of the NVMe PCIe SSD installed in the system.