ICA SuperCodec is a H.264 decoder integrated on ThinOS
ICA client side. Server encodes the session image into H.264 stream
and sends it to client side. Client decodes the H.264 stream by SuperCodec
and show the image on screen. It should improve user experience especially
for HDX3DPro desktops.
Supported environment
XenDesktop and XenApp 7.5 or later versions
Supported platforms
All the ThinOS 8.5-based devices support ICA SuperCodec.
Verifying the working status of the ICA connections
For Wyse 3010 with ThinOS (T10)
and Wyse 3020 with ThinOS (T10D)
ICA SuperCodec
is enabled by default when ThinOS resolution is lesser than or equal
to 1920 x 1080.
When the feature is working, the following
results are displayed:
ThinOS event log ICA: SuperCodec
enabled
Click HDX Monitor > Graphics > Thinwire advanced > Encoder: DeepCompressionV2Encoder for NON-HDX3DPro desktops or DeepCompressionEncoder
for HDX3DPro desktops.
From XenDesktop/ XenApp
7.11, the Encoder is changed to Deprecated.
When the feature is disabled, you
can view the following results:
ThinOS event log:
System resolution exceeds hardware limitation (1920 x 1080), disable
SuperCodec
NOTE:For ICA connections,
there is no INI parameter.
ICA SuperCodec behavior on Wyse 3040 thin client
ICA SuperCodec is disabled automatically, if the ThinOS
monitor resolution is bigger than 1920 x 1200. The event log System resolution exceeds hardware limitation (1920 x
1200), disable Supercodec is printed.
Данные для раздела недоступны
Поставьте оценку (1–5 звезд).
Поставьте оценку (1–5 звезд).
Поставьте оценку (1–5 звезд).
Выберите ответ на вопрос, была ли статья полезной.
Комментарии не должны содержать следующие специальные символы: <>()\