The system administrator can choose from the following options, available in the left pane:
To disable a specific day, set all the hour and minute fields in that template to 0 (zero).
To lock the time to operate on AC power without charging the battery:
Set Hours: 0-23
Set Minutes: 0, 15, 30, 45
To lock the time to resume normal power/charge operation:
Set Hours: 0-23
Set Minutes: 0, 15, 30, 45
To set a range for the threshold limits, enter the Minimum (1 - 100) and Maximum (Minimum - 100) values. If a minimum or maximum limit is not within the client system's minimum or maximum capabilities, the client system's minimum or maximum limit will be used.
Typical uses for these settings are:
Set the minimum and maximum threshold limits and leave the Threshold value field blank. This sets a limit for the range, but allows the threshold value to be modified in the UI.
OR:
Set Threshold value and leave the Minimum threshold limit and Maximum threshold limit blank. This value will be locked and cannot be modified in the UI.