- Notes, cautions, and warnings
- Overview
- Security quick reference
- Product and subsystem security
- Miscellaneous configuration and management elements
- Internal security information
- Federal Information Processing Standard 140-3 Compliance
- IPv6 Support
- Appendix A
- Appendix B
- Resources and support
- Contacting Dell EMC
Dell EMC iDRAC Service Module Security Configuration Guide
Overview
As part of an effort to improve its product lines, Dell EMC periodically releases revisions of its software and hardware. Therefore, some functions described in this document might not be supported by all versions of the software or hardware currently in use. The product release notes provide the most up-to-date information on product features.
Contact your Dell EMC technical support professional if a product does not function properly or does not function as described in this document.
NOTE This document was accurate at publication time. Go to Dell EMC Online Support (https://www.dell.com/support) ensure that you are using the latest version of this document.
Purpose
This document describes the security configurations related to Dell EMC iDRAC Service Module (iSM), and its installation, configuration, and functionality on the host operating system. The functionality might involve communication with other sub-systems, which is out of scope for this document. The sub-systems within the host include:
- Integrated Dell Remote Access Controller (iDRAC)
- Dell EMC system firmware (BIOS)
- Operating system logging interface
- System chipset SATA controller
- NetSNMP configuration
- Microsoft Windows Registry
- Microsoft Windows certificate store
Sub-systems outside the host include the Dell EMC support server. The security posture of these subsystems is out of scope of this document.
Audience
This document is intended for individuals who are responsible for managing security of Dell EMC iDRAC Service Module (iSM).
请提供评级（1-5星）。
请提供评级（1-5星）。
请提供评级（1-5星）。
请选择这篇文章是否有帮助。
注释中不得包含以下特殊字符：<>()\