- Notes, Cautions, and Warnings
- About This Guide
- C9010 Hardware Description
- Installing the
Hardware
- Installing the Chassis in a Two-Post Threaded-Hole Rack
- Installing the Chassis in a Four-Post Rack
- Using Dell ReadyRails (Optional)
- Using a Rack Mount Tray (Optional)
- Attaching the Chassis Ground
- Installing a Fan Module
- Installing RPMs and Line Cards
- Installing a Power Supply
- Installing the Cable Management System
- Installing the QSFP+ and SFP+ Optics
- Powering Up the System
- Checking LED Status
- Configuring the Software
- Dell Networking Support
- Technical Specifications
Dell Networking C9010 Getting Started Guide
About This Guide
This document provides information about how to install a C9010 switch with the base configuration in a rack, perform an initial software configuration, and connect to a network. For complete information about C9010 installation and configuration, refer to these documents:
| Information | Documentation |
|---|---|
| Hardware installation, power-up instructions, initial software configuration, and network connection | Dell Networking Installation Guide for the C9010 Switch |
| Software configuration | Dell Networking Configuration Guide for the C9000 Series |
| Command-line interface | Dell Networking Command Line Reference Guide for the C9000 Series |
| Latest updates | Dell Networking Release Notes for the C9010 Switch |
请提供评级（1-5星）。
请提供评级（1-5星）。
请提供评级（1-5星）。
请选择这篇文章是否有帮助。
注释中不得包含以下特殊字符：<>()\