- Notes, cautions, and warnings
- Introduction
- Linux
- Overview—deployment steps and options
- Preparation for deployment
- Download installation packages—Linux
- Deploying PowerFlex with SELinux
- Prepare server operating systems for support of large-scale systems (up to 2048 SDCs)
- Prepare the DAX devices
- Install and configure the PowerFlex Gateway
- Install PowerFlex Gateway on Linux
- Install PowerFlex Gateway on Windows
- Configure PowerFlex Gateway properties
- Advanced and optional PowerFlex Gateway tasks
- Install the PowerFlex Gateway without assigning an admin password
- Reset PowerFlex Gateway password
- Store Tomcat's keystore password in the lockbox
- PowerFlex Gateway installation with a custom Java configuration
- Install Java on SUSE 12 servers
- Certificate management for PowerFlex Gateway
- Using SSH authentication on the PowerFlex Gateway
- Preparation tasks for SLES, Oracle Linux and Ubuntu
- Prepare the CSV file
- Clean the PowerFlex VMware environment
- Deploying PowerFlex using a non-root user
- Configure the OpenStack Nova Compute service
- Deploy PowerFlex
- Installation wizard
- Customizable installation using CSV file—hyper-converged system
- Customizable installation using CSV file—two-layer system
- Log in and upload installation packages
- Upload the CSV file
- Start the customized installation
- Complete the customized installation—two-layer system backend
- Install SDC on frontend servers
- Install the PowerFlex presentation server
- SDC (scini) driver configuration for SELinux
- Add components to a PowerFlex system—Linux
- VMware ESXi
- Overview—deployment steps
- Preparation for deployment
- Deploy PowerFlex using the vSphere PowerFlex plug-in
- Manually deploy PowerFlex on ESXi servers
- Manual Deployment of VxFlex OS on ESXi Servers
- Deploying the PowerFlex storage virtual machine (SVM)
- Manually install PowerFlex components on the SVMs
- Register the vSphere PowerFlex plug-in
- Install SDC on an ESXi server using the vSphere PowerFlex plug-in
- Install the SDC on an ESXi-based server and connect it to PowerFlex using esxcli
- Manually remove a VIB file from an ESXi host
- Add components to a PowerFlex system—ESXi
- PowerFlex Installer REST API
- PowerFlex VASA
- Post-deployment tasks
Deploy Dell PowerFlex v3.6.x
Introduction
This guide contains deployment procedures for PowerFlex.
请提供评级（1-5星）。
请提供评级（1-5星）。
请提供评级（1-5星）。
请选择这篇文章是否有帮助。
注释中不得包含以下特殊字符：<>()\