□ |
Completed
Solution Integration
Document
(SID)
|
□ |
VGA monitor and USB keyboard (for initial configuration) |
□ |
Cables for SAN
- Fibre Channel with 1GbE appliance or Fibre Channel
with 10GbE appliance – Four LC Fibre Channel cables for each appliance
- 10GbE iSCSI appliance – Four LC optical fiber cables
or twinax cables for each appliance
|
□ |
Cables for client network
- Fibre Channel with 1GbE appliance – Eight RJ45/Cat
5e or better cables for each appliance
- Fibre Channel with 10GbE appliance or 10GbE iSCSI
appliance – Four LC optical fiber cables or Twinax cables for each
appliance
|
□ |
Cables for internal network
- Fibre Channel with 1GbE appliance:
- Single appliance – Four RJ45/Cat 5e or better cables
for each appliance (controllers are directly connected to each other)
- Multiple appliances – Eight RJ45/Cat 5e or better
cables for each appliance
- Fibre Channel with 10GbE appliance:
- Single appliance – Two LC optical fiber cables or
twinax cables (controllers are directly connected to each other; two
Twinax cables shipped with each appliance)
- Multiple appliances – Four LC optical fiber cables
or twinax cables for each appliance
- 10GbE iSCSI appliance – None (shared with SAN cables)
|
□ |
(10GbE optical networks only) Intel SFP+ transceivers
purchased from Dell for use in an FS8600 appliance
- Fibre Channel with 10GbE appliance:
- Client network – Four Intel SFP+ transceivers for
each appliance
- Internal network – Four Intel SFP+ transceivers
for each appliance
- 10GbE iSCSI appliance:
- Client network – Four Intel SFP+ transceivers for
each appliance
- SAN/internal network – Four Intel SFP+ transceivers
for each appliance
-
NOTE: The FS8600
appliance is compatible with specific Intel SFP+ transceivers purchased
only from Dell. Other SFP+ transceiver models do not work in the FS8600
appliance.
|